V-belt Movendis PP-SPA2132
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPA
- Series
- PowerPlus Narrow Wedge V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-SPA2132 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-SPA2132 and any equivalents.
The Movendis PP-SPA2132 is a PowerPlus narrow wedge V-belt with an SPA profile and a 2132 mm length. It measures 12.7 mm across the top, 10 mm in height and has a 40-degree angle. This page is set up for maintenance and purchasing staff who need to confirm it against the belt being replaced.
Start by reading the marking on the back of the old belt. If it shows SPA and 2132, the PP-SPA2132 is the same profile and length. The SPA profile is a narrow wedge section, so it fits pulleys cut for that section rather than a classic V-belt groove. Confirm the top width of 12.7 mm and height of 10 mm against the old belt if the marking is worn.
When the marking is gone, measure the outside length and compare it with the 2132 mm figure. Check the belt cross-section with a caliper or a profile gauge: the 40-degree angle and the 12.7 mm by 10 mm section identify the SPA range. Also inspect the pulleys for wear, alignment and groove condition before fitting a replacement.
If you are replacing more than one belt on the same drive, order the same profile and length for each position so the set matches. Send the part number PP-SPA2132, the belt marking or your measurements by WhatsApp or email and the team will confirm the belt or suggest an equivalent.
Dimensions
- Section
- SPA
- Length
- 2132mm
Frequently asked questions
- How do I confirm the PP-SPA2132 matches my old belt?
- Check the marking on the back of the old belt for SPA and 2132. If it is unreadable, measure the outside length and the cross-section: the PP-SPA2132 is 2132 mm long, 12.7 mm across the top, 10 mm high and has a 40-degree angle.
- Can I use this belt if my drive takes a different profile?
- No. The PP-SPA2132 is an SPA profile narrow wedge V-belt. It is intended for pulleys that take the SPA section. If your old belt shows a different profile, send that marking or your measurements and the team will help identify the right belt.
- What information should I send for a quote?
- Send the part number PP-SPA2132, or the marking from the old belt. If the marking is gone, send the profile, the outside length and the cross-section measurements. Photos of the belt and the pulley groove can also help.