V-belt Movendis PP-SPA2082
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPA
- Series
- PowerPlus Narrow Wedge V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-SPA2082 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-SPA2082 and any equivalents.
This Movendis PowerPlus narrow wedge V-belt is identified by part number PP-SPA2082. It has an SPA profile, a length of 2082 mm, a top width of 12.7 mm, a height of 10 mm, and a 40-degree angle. Narrow wedge belts are used in industrial drives where space is limited and speed ratios are moderate to high.
To confirm fit, compare the marking on the back of the existing belt with PP-SPA2082. Check that the profile is SPA and the length is 2082 mm. Also verify the top width of 12.7 mm, height of 10 mm, and 40-degree angle against the pulley groove. If the old belt is worn or the marking is unreadable, measure the outside length and the top width.
Narrow wedge V-belts like this one are common on fans, pumps, compressors, and other industrial equipment. They transmit power through a wedging action in the pulley groove, so the profile and angle must match the sheave. A belt that is too wide, too narrow, or the wrong length will not seat correctly and can slip or wear quickly.
When requesting a quote, send the part number PP-SPA2082 and the quantity needed. If you are replacing multiple belts on the same drive, note that they should be replaced as a set to maintain even tension. Our team can help confirm the right belt or suggest an equivalent based on the data you provide.
Dimensions
- Section
- SPA
- Length
- 2082mm
Frequently asked questions
- How do I confirm that PP-SPA2082 fits my drive?
- Check the marking on the back of the old belt. It should read PP-SPA2082 or show an SPA profile with a 2082 mm length. Also measure the top width (12.7 mm), height (10 mm), and angle (40 degrees) to ensure it matches your pulley groove.
- What should I send to get a quote for this belt?
- Send the part number PP-SPA2082, the quantity you need, and any details about the drive or application. If you are unsure about the part number, include the marking from the old belt and the pulley dimensions.
- Can I replace just one belt on a multi-belt drive?
- For best performance, replace all belts on the same drive as a set. Mixing new and worn belts can cause uneven tension and premature failure. Provide the quantity of belts on the drive when requesting a quote.