V-belt Movendis PP-CX48-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- CX
- Series
- PowerPlus EPDM Cogged Raw Edge Classical
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-CX48-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-CX48-EPDM-AS and any equivalents.
The Movendis PP-CX48-EPDM-AS is a cogged classical V-belt in the CX profile with a length of 1275 mm. It is built for drives that use a classical cogged belt and need an exact profile and length match. The most reliable way to select it is to read the marking on the belt you are replacing.
Start with the belt currently on the drive. A CX profile belt will not substitute for a different profile, and the 1275 mm length must match the drive's required span. Check the back of the old belt for the profile and length marking, then compare it with the PP-CX48-EPDM-AS. If the marking is worn away, measure the belt and confirm the profile before ordering.
This belt is a cogged classical V-belt, so the raw-edge cog design is part of the construction. Inspect the pulleys for wear, alignment and debris while the belt is off, and check that the sheave grooves are clean and free of damage. A worn pulley can shorten the life of a new belt even when the size is correct.
When you request a quote, send the part number PP-CX48-EPDM-AS along with the marking from your old belt if you have it. If you are unsure of the profile or length, include a photo of the belt back and the drive setup. The team can confirm the right belt or suggest an equivalent based on the details you provide.
Dimensions
- Section
- CX
- Length
- 1275mm
Frequently asked questions
- How do I confirm this belt matches the one I am replacing?
- Read the profile and length marking on the back of the old belt. The PP-CX48-EPDM-AS is a CX profile belt with a length of 1275 mm, so both values need to match the drive requirements.
- What should I send with my quote request?
- Send the part number PP-CX48-EPDM-AS and, if possible, the marking from the old belt. A photo of the belt back and the drive can help confirm the profile and length.
- Can you help if the old belt marking is unreadable?
- Yes. Provide the part number and any measurements or photos you have. The team can help identify the correct belt or suggest an equivalent.