V-belt Movendis PP-CX48,5-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- CX
- Series
- PowerPlus EPDM Cogged Raw Edge Classical
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-CX48,5-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-CX48,5-EPDM-AS and any equivalents.
The Movendis PP-CX48,5-EPDM-AS is a cogged classical V-belt in the CX profile with a length of 1288 mm. When you need to match a belt being replaced, the most reliable starting point is the marking on the back of the old belt. This page covers what to check before requesting a quote.
Cogged classical V-belts are used on drives where the pulley groove matches the classical profile. To confirm this belt fits your application, read the old belt: look for the CX profile and the length marking. If the old belt shows CX and a length that corresponds to 1288 mm, this Movendis belt is the same size. If the marking is worn or missing, measure the outside length and compare it to the 1288 mm figure.
The CX profile and the 1288 mm length are the two key dimensions. Do not rely on a visual match alone, because belts with the same profile can differ in length. If the drive uses multiple belts, replace them as a set so the load is shared evenly. Inspect the pulleys for wear or debris while the belt is off.
We carry the Movendis PP-CX48,5-EPDM-AS and can help you confirm it against your old belt. Send the part number, the marking on the back of the old belt, and the drive details by WhatsApp or email. Our team replies promptly and can help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- CX
- Length
- 1288mm
Frequently asked questions
- How do I match this belt to the one I am replacing?
- Check the marking on the back of the old belt. If it shows the CX profile and a length that corresponds to 1288 mm, the Movendis PP-CX48,5-EPDM-AS is the same size. If the marking is unreadable, measure the outside length and compare it to 1288 mm.
- Can I use this belt on a drive that takes a different profile?
- No. The CX profile must match the pulley groove. A belt with a different profile will not seat correctly. Confirm the profile from the old belt or the drive documentation before ordering.
- What information should I send with my quote request?
- Send the part number PP-CX48,5-EPDM-AS, the marking on the old belt if readable, and any drive details you have. If you are replacing a set, include the quantity. We will confirm the belt or suggest an equivalent.