V-belt Movendis PP-CX24-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- CX
- Series
- PowerPlus EPDM Cogged Raw Edge Classical
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-CX24-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-CX24-EPDM-AS and any equivalents.
The Movendis PP-CX24-EPDM-AS is a cogged classical V-belt in the CX profile with a 666 mm length. It is built for drives that use a classical cross-section and need the flexibility of a raw-edge cogged construction. Use the part number and the markings on the old belt to confirm the match before ordering.
To match this belt to the one being replaced, start with the marking on the back of the old belt. You are looking for the profile and the length: CX and 666 mm. The PP-CX24-EPDM-AS is a cogged classical V-belt, so the raw-edge teeth are part of the construction, not an add-on. If the old belt is too worn to read, measure the outside length and compare it to 666 mm, and check that the cross-section matches the CX profile.
A cogged classical V-belt like this one is often used where a standard wrapped belt would run hot or slip on small pulleys. The raw-edge cogged design helps the belt flex around smaller diameters. Before fitting a replacement, inspect the pulleys for wear, alignment and debris, and check that the tensioner moves freely. If the drive uses more than one belt, replace them as a set so the load stays even.
Send the part number PP-CX24-EPDM-AS, or the complete marking from the old belt, by WhatsApp or email to request a quote. If you are unsure of the profile or length, include photos of the belt and the pulley grooves. The team can confirm the right belt or suggest an equivalent from the Movendis PowerPlus EPDM Cogged Raw Edge Classical series.
Dimensions
- Section
- CX
- Length
- 666mm
Frequently asked questions
- How do I confirm this is the right belt for my drive?
- Check the marking on the back of the old belt for the CX profile and a 666 mm length. The PP-CX24-EPDM-AS is a cogged classical V-belt in that profile and length. If the marking is unreadable, measure the outside length and compare it to 666 mm, and match the cross-section to CX.
- Can I replace just one belt on a multi-belt drive?
- It is good practice to replace all belts in a multi-belt drive at the same time. Belts wear and stretch together, so mixing a new belt with old ones can cause uneven loading. Inspect the pulleys and tensioner while the drive is open.
- What information should I send for a quote?
- Send the part number PP-CX24-EPDM-AS, or the full marking from the old belt, by WhatsApp or email. If you have photos of the belt and the pulley grooves, include those. The team can confirm the CX profile and 666 mm length or suggest an equivalent.