V-belt Movendis PP-BX62-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- BX
- Series
- PowerPlus EPDM Cogged Raw Edge Classical
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-BX62-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-BX62-EPDM-AS and any equivalents.
The Movendis PP-BX62-EPDM-AS is a cogged classical V-belt in the BX profile with a length of 1617 mm. When you need a replacement, the marking on the old belt is your best starting point. We carry this belt and can help you confirm it against your drive.
Start by reading the marking on the back of the old belt. It usually shows the profile and a length code. Write down exactly what you see, including the profile letters and the length number. If the belt is worn or dirty, clean it carefully and use good lighting. A photo of the marking can also help us verify the details.
The Movendis PP-BX62-EPDM-AS is a cogged classical V-belt with a BX profile and a length of 1617 mm. The cogged raw edge design is common in industrial drives where space is limited and flexibility matters. This belt is part of the PowerPlus EPDM Cogged Raw Edge Classical series.
To request a quote, send us the part number PP-BX62-EPDM-AS or the marking from your old belt via WhatsApp or email. Our team will confirm the profile and length and reply promptly. If you need to verify the fit, include the drive details and any photos of the belt and pulleys.
Dimensions
- Section
- BX
- Length
- 1617mm
Frequently asked questions
- How do I read the marking on my old belt?
- Look for letters and numbers printed on the back of the belt. The profile is often a short code like BX, and the length may be a number. Write down the full marking and send it to us for confirmation.
- What if the marking on my old belt is unreadable?
- If the marking is worn off, measure the outside length and width of the belt as best you can. Send those measurements along with photos of the drive. We can help identify the correct replacement.
- Can you help confirm the right belt for my drive?
- Yes. Send us the part number PP-BX62-EPDM-AS or the old belt marking, plus any drive details you have. Our team will check the profile and length and suggest an equivalent if needed.