V-belt Movendis PP-BX61,5-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- BX
- Series
- PowerPlus EPDM Cogged Raw Edge Classical
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-BX61,5-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-BX61,5-EPDM-AS and any equivalents.
The Movendis PP-BX61,5-EPDM-AS is a cogged classical V-belt in the BX profile with a length of 1604 mm. The BX profile and the 1604 mm length are the two values you need to match when selecting a replacement for a worn belt on a classical drive.
This belt belongs to the Movendis PowerPlus EPDM Cogged Raw Edge Classical series. The cogged raw edge construction is typical for drives where a classical profile is required but the pulley diameters are small enough that a standard wrapped belt would run hot or slip. The BX profile sets the cross-section and the 1604 mm length sets the outside circumference; both must match the drive before you install the belt.
To confirm this is the correct replacement, read the marking on the back of the old belt. If it shows BX and a length close to 1604 mm, this part is the direct match. If the old belt is a different profile or a different length, the drive will not run correctly even if the belt can be forced onto the pulleys.
For a quote, send the part number PP-BX61,5-EPDM-AS and the quantity you need. If you are unsure whether the BX profile is correct for your drive, include the old belt marking and the pulley diameters; the team can confirm the right belt or suggest an equivalent.
Dimensions
- Section
- BX
- Length
- 1604mm
Frequently asked questions
- What do the BX profile and 1604 mm length mean for my drive?
- The BX profile defines the belt cross-section and the 1604 mm length defines the belt circumference. Both must match the pulleys and the center distance of your drive. If either value differs from the old belt, the replacement will not fit or run correctly.
- How do I confirm this is the right replacement belt?
- Check the marking on the back of the belt you are replacing. If it shows BX and a length of 1604 mm, the PP-BX61,5-EPDM-AS is the matching part. If the marking is different, send it to us and we can help identify the correct belt.
- What information should I send with my quote request?
- Send the part number PP-BX61,5-EPDM-AS and the quantity required. If you want us to verify the profile or length, also include the old belt marking and the pulley diameters so we can confirm the fit or suggest an equivalent.