V-belt Movendis PP-BX39,5-EPDM-AS

MOVENDIS PP-BX39,5-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-BX39,5-EPDM-AS and any equivalents.

The Movendis PP-BX39,5-EPDM-AS is a cogged classical V-belt in the BX profile with a length of 1045 mm. When replacing a belt, the most reliable approach is to match the profile and the length to the belt you are removing. This page covers what to check before you request a quote.

Start with the belt that is coming off the drive. Read the marking printed on the back of the old belt and compare it to the profile and length on this page. The BX profile and the 1045 mm length are the two figures that determine whether this Movendis belt fits the same position. If the old marking is worn or unreadable, measure the outside length and note the cross-section before ordering.

A cogged classical V-belt has a raw edge and a molded cog pattern on the underside. That construction is common on drives with small pulleys, where a standard wrapped belt may not flex as easily. Inspect the pulleys at the same time: look for worn grooves, oil or debris, and check that the belt sits at the correct height in the groove. Replace the belt if the cords are exposed or the sidewalls are glazed.

If a drive uses more than one belt, replace the full set at once so the load stays evenly distributed. Send the part number PP-BX39,5-EPDM-AS, the profile, the 1045 mm length, and a photo of the old belt marking by WhatsApp or email. Our team will confirm the belt or suggest an equivalent and reply with a quote.