V-belt Movendis PP-BX144-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- BX
- Series
- PowerPlus EPDM Cogged Raw Edge Classical
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-BX144-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-BX144-EPDM-AS and any equivalents.
The Movendis PP-BX144-EPDM-AS is a cogged classical V-belt in the BX profile with a length of 3700 mm. Cogged classical belts are commonly used on drives with small pulleys where a standard wrapped belt may not flex easily. This page helps you confirm that the belt matches your application before you request a quote.
To confirm fit, read the marking on the back of the old belt and compare the profile and length. The profile should read BX and the length should be 3700 mm. If the old belt is worn or the marking is unreadable, measure the outside length and check the pulley groove width to confirm it accepts a BX profile belt.
Cogged classical V-belts are often found on industrial drives such as fans, pumps, compressors and other equipment where the belt bends around small pulleys. The cogged construction helps the belt flex, but the drive still needs the correct profile and length to run properly. Check the pulleys for wear, alignment and any debris before installing a new belt.
If you are replacing more than one belt on the same drive, order the same part number for each position so the set matches. Send the part number PP-BX144-EPDM-AS by WhatsApp or email to request a quote. If you are unsure about the profile or length, include a photo of the belt marking and the pulley dimensions with your request.
Dimensions
- Section
- BX
- Length
- 3700mm
Frequently asked questions
- How do I confirm that the PP-BX144-EPDM-AS is the right belt for my drive?
- Check the marking on the old belt. The profile should be BX and the length should be 3700 mm. If the marking is not clear, measure the outside length and check that the pulley groove is suitable for a BX profile belt.
- Where is this type of cogged classical V-belt used?
- Cogged classical V-belts are commonly used on industrial drives such as fans, pumps and compressors, especially where the belt runs on smaller pulleys. The exact application depends on the equipment and the drive design.
- What should I send to request a quote?
- Send the part number PP-BX144-EPDM-AS by WhatsApp or email. If you want us to help confirm the fit, include a photo of the belt marking and the pulley dimensions.