V-belt Movendis PP-BX143,5-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- BX
- Series
- PowerPlus EPDM Cogged Raw Edge Classical
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-BX143,5-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-BX143,5-EPDM-AS and any equivalents.
The Movendis PP-BX143,5-EPDM-AS is a cogged classical V-belt in the BX profile with a length of 3687 mm. It belongs to the PowerPlus EPDM Cogged Raw Edge Classical series. To match it to the belt being replaced, read the marking on the old belt and compare the profile and the length.
Start with the belt on the drive. A cogged classical V-belt carries its identification on the back: profile, length and part number. If the old belt shows BX and a length that matches 3687 mm, the PP-BX143,5-EPDM-AS is the same size. If the marking is worn or missing, measure the outside length and confirm the profile against the pulley groove before ordering.
When the profile and length agree, the replacement follows the same routing and tensioning procedure as the belt it replaces. On multi-belt drives, inspect every belt in the set and replace them together so the load stays even. Check the pulleys for wear, alignment and debris at the same time.
For a quote, send the part number PP-BX143,5-EPDM-AS by WhatsApp or email. If the old belt is marked with a different number, send the profile, the length and a photo of the back of the belt. We carry the Movendis line and can help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- BX
- Length
- 3687mm
Frequently asked questions
- How do I confirm this belt matches the one I am replacing?
- Compare the profile and length on the old belt's back marking with the BX profile and 3687 mm length of the PP-BX143,5-EPDM-AS. If the marking is not readable, measure the old belt and check the pulley groove profile.
- Can I replace just one belt on a multi-belt drive?
- On a set of belts driving the same load, replace all belts at the same time. Mixing a new belt with worn belts can cause uneven tension and load sharing.
- What should I send to request a quote?
- Send the part number PP-BX143,5-EPDM-AS by WhatsApp or email. If you are not sure of the number, send the profile, the length and a photo of the back of the belt.