V-belt Movendis PP-BX142-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- BX
- Series
- PowerPlus EPDM Cogged Raw Edge Classical
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-BX142-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-BX142-EPDM-AS and any equivalents.
This Movendis PowerPlus EPDM Cogged Raw Edge Classical belt is a cogged classical V-belt in the BX profile, 3649 mm long. Cogged classical belts are used on drives that need a raw-edge grip and the flexibility to run over small pulleys, such as many industrial fans, pumps, compressors and process machinery. Confirm fit by matching the profile and the length on the belt you are replacing.
The BX profile and 3649 mm length are the two numbers to check first. Read the marking on the back of the old belt: it should show the same profile and length. If the drive uses more than one belt, replace the full set at the same time so the belts share the load evenly.
Before ordering, inspect the pulleys for wear, rust or debris, and check that the belts are tensioned to the drive maker's specification. A worn pulley groove can shorten belt life even when the replacement is correct. If the marking is unreadable, measure the outside length or send a photo of the belt and the drive.
We carry the Movendis PP-BX142-EPDM-AS and can help confirm it against the belt on your drive. Send the part number, the profile and length from the old belt, and the drive details by WhatsApp or email for a quote.
Dimensions
- Section
- BX
- Length
- 3649mm
Frequently asked questions
- How do I confirm this belt fits my drive?
- Match the profile and length to the marking on the belt you are replacing. This belt is BX profile and 3649 mm long. If the marking is worn, measure the old belt or send a photo of the drive.
- Should I replace all belts on a multi-belt drive?
- Yes. On a drive that uses more than one belt, replace the full set so the belts are the same length and share the load. Mixing a new belt with worn belts can cause uneven tension and early failure.
- What do I send for a quote?
- Send the part number PP-BX142-EPDM-AS, the profile and length from the old belt, and the drive details by WhatsApp or email. We will confirm the belt or suggest an equivalent.