V-belt Movendis PP-BX141,5-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- BX
- Series
- PowerPlus EPDM Cogged Raw Edge Classical
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-BX141,5-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-BX141,5-EPDM-AS and any equivalents.
The Movendis PP-BX141,5-EPDM-AS is a cogged classical V-belt in the BX profile with a length of 3636 mm. It belongs to the PowerPlus EPDM Cogged Raw Edge Classical series. To match it to the belt being replaced, compare the profile and the length first, then confirm the part number.
Start by reading the marking on the back of the old belt. The profile should show BX, and the length should correspond to 3636 mm. If the old belt is worn, dirty or missing its marking, measure the outside length and check the cross-section against the BX profile before ordering.
The Movendis PP-BX141,5-EPDM-AS is a cogged classical V-belt, which means it has a raw edge and molded cogs. This construction is common on drives with small pulleys or where some flexibility is useful. When replacing it, inspect the pulley grooves for wear, debris or rust, and check that the belt sits correctly in the groove.
If you are unsure whether this is the right belt, send the part number, the profile and the length to our team by WhatsApp or email. We can confirm the BX profile and 3636 mm length and suggest an equivalent if needed. For drives with multiple belts, replace the full set at the same time.
Dimensions
- Section
- BX
- Length
- 3636mm
Frequently asked questions
- How do I confirm the Movendis PP-BX141,5-EPDM-AS matches my old belt?
- Check the marking on the back of the old belt for the BX profile and a length corresponding to 3636 mm. If the marking is unreadable, measure the outside length and compare the cross-section to the BX profile.
- What should I send to get a quote for this belt?
- Send the part number PP-BX141,5-EPDM-AS, or the profile BX and length 3636 mm, by WhatsApp or email. If you have a photo of the old belt marking, include it.
- Should I replace all belts on the drive at once?
- Yes. On drives that use multiple belts, replacing the full set helps maintain even tension and reduces the chance of mismatched wear.