V-belt Movendis PP-BX135,5-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- BX
- Series
- PowerPlus EPDM Cogged Raw Edge Classical
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-BX135,5-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-BX135,5-EPDM-AS and any equivalents.
This Movendis belt is a cogged classical V-belt in the BX profile with a 3484 mm length. Cogged classical V-belts are used on industrial drives where a standard wrapped belt runs hot or slips, such as fans, pumps, compressors and other motor-driven equipment. To confirm fit, compare the profile and the length to the marking on your existing belt.
The BX profile is a classical V-belt cross-section. The cogged raw edge construction is common on drives with small pulleys, back-side idlers or high ambient heat. The 3484 mm length is the datum to match; if your drive uses more than one belt, replace the full set so the load stays even across the grooves.
Before ordering, read the marking on the back of the old belt and note the profile and length. Check the pulley grooves for wear, oil or debris, and confirm the belt sits correctly in the groove. If the marking is worn away, measure the outside length and send it with a photo of the belt and the drive.
We carry the Movendis PP-BX135,5-EPDM-AS for maintenance, engineering and purchasing teams. Send the part number, profile and length by WhatsApp or email and our team will confirm the belt or suggest an equivalent.
Dimensions
- Section
- BX
- Length
- 3484mm
Frequently asked questions
- How do I confirm this belt fits my drive?
- Compare the profile and length to the marking on your existing belt. The profile is BX and the length is 3484 mm. If the marking is unreadable, measure the outside length and send a photo of the belt and the drive.
- Can I replace just one belt on a multi-belt drive?
- No. On a drive with more than one belt, replace the full set at the same time so all belts carry the load evenly.
- What should I send to request a quote?
- Send the part number PP-BX135,5-EPDM-AS, the profile BX and the length 3484 mm by WhatsApp or email. If you are unsure of the part number, send the marking from the old belt or its measured length.