V-belt Movendis PP-BX134,5-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- BX
- Series
- PowerPlus EPDM Cogged Raw Edge Classical
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-BX134,5-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-BX134,5-EPDM-AS and any equivalents.
The Movendis PP-BX134,5-EPDM-AS is a cogged classical V-belt in the BX profile with a length of 3458 mm. When replacing a belt, match both the profile and the length to the belt being removed. This page covers the details you need to confirm before requesting a quote.
To match this belt to the one being replaced, start with the marking on the old belt. Look for the profile and length, or the part number. The PP-BX134,5-EPDM-AS has a BX profile and a length of 3458 mm. If the old belt is worn or the marking is unreadable, measure the outside length and compare it to 3458 mm, and confirm the cross-section matches the BX profile. A belt that is too long or too short will not tension correctly, and the wrong profile will not sit properly in the pulley groove.
This is a cogged classical V-belt, which has a raw edge and a cogged construction. It is part of the Movendis PowerPlus EPDM Cogged Raw Edge Classical series. Cogged classical V-belts are used in industrial drives where a classical profile is required. The cogged design can help with flexibility and heat dissipation, but the primary selection factors remain the profile and length.
When you request a quote, include the part number PP-BX134,5-EPDM-AS, the profile BX and the length 3458 mm. If you are replacing a belt on a drive with multiple belts, check all belts for wear and replace them as a set. Send your request by WhatsApp or email, and the team will confirm the belt or suggest an equivalent.
Dimensions
- Section
- BX
- Length
- 3458mm
Frequently asked questions
- How do I confirm this belt matches the one I am replacing?
- Compare the profile and length on the old belt to the BX profile and 3458 mm length of the PP-BX134,5-EPDM-AS. If the marking is worn, measure the outside length and check the cross-section against the pulley groove.
- What should I send to request a quote?
- Send the part number PP-BX134,5-EPDM-AS, or the profile BX and length 3458 mm, by WhatsApp or email. If you have the old belt, include a photo of the back marking.
- Should I replace all belts on the drive at the same time?
- Yes. On drives with multiple belts, replace them as a set so they wear and tension evenly. Mixing new and worn belts can cause uneven load and premature failure.