V-belt Movendis PP-BX118,5-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- BX
- Series
- PowerPlus EPDM Cogged Raw Edge Classical
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-BX118,5-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-BX118,5-EPDM-AS and any equivalents.
The Movendis PP-BX118,5-EPDM-AS is a cogged classical V-belt in the BX profile with a length of 3052 mm. It is built for drives that use a classical BX cross-section, where the raw-edge cogged construction suits smaller pulleys and higher-speed operation.
When you are matching this belt to the one being replaced, start with the marking on the back of the old belt. Confirm the profile is BX and the length is 3052 mm, then compare the part number on the belt to PP-BX118,5-EPDM-AS. If the old belt is worn or the marking is unreadable, measure the outside length and check the pulley groove width to confirm the BX profile.
The cogged raw-edge design is common on drives where a standard wrapped belt would run hot or slip. Inspect the pulleys for wear, alignment and debris before fitting the new belt, and check that the belt sits correctly in the groove. If the drive uses multiple belts, replace them as a set so the load is shared evenly.
Dimensions
- Section
- BX
- Length
- 3052mm
Frequently asked questions
- How do I confirm the Movendis PP-BX118,5-EPDM-AS is the right belt for my drive?
- Check the profile and length against the belt you are replacing. This belt is BX profile and 3052 mm long. If the old marking is gone, measure the outside length and confirm the pulley groove matches a BX cross-section.
- What should I send to request a quote for this belt?
- Send the part number PP-BX118,5-EPDM-AS and the quantity you need by WhatsApp or email. If you are unsure of the profile or length, include the marking from the old belt or the drive details so the team can help confirm the right belt.
- Can I replace just one belt on a multi-belt drive?
- For even load sharing, replace all belts in the set at the same time. Mixing a new belt with worn belts can cause the new belt to carry more than its share of the load.