V-belt Movendis PP-AX99,5-EPDM-AS

MOVENDIS PP-AX99,5-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-AX99,5-EPDM-AS and any equivalents.

The Movendis PP-AX99,5-EPDM-AS is a cogged classical V-belt in the AX profile with a length of 2564 mm. It is built for drives where a classical cross-section is required and the cogged raw edge helps the belt run cool and grip the pulley. Use the marking on the back of the old belt to confirm this part number before you order.

Cogged classical V-belts like this one are common on industrial drives such as fans, pumps, compressors and other equipment that runs at moderate speeds. The AX profile suits pulleys cut for classical AX grooves. The cogged raw edge is designed to flex around smaller pulleys and to release heat, which can extend belt life on drives that see frequent starts or continuous duty.

To confirm fit, read the belt that is coming off. Check the profile on the back of the belt and measure the length if the marking is worn. The replacement must match both the AX profile and the 2564 mm length. Also inspect the pulleys for wear, alignment and debris, and check that the drive is tensioned to the equipment manufacturer's specification.

When you request a quote, send the part number PP-AX99,5-EPDM-AS and the quantity you need. If you are replacing more than one belt on a multi-belt drive, send the full set so we can match the profile and length across the drive. If the marking is unreadable, send a photo of the belt and the pulley groove so we can help identify the correct replacement.