V-belt Movendis PP-AX71-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- AX
- Series
- PowerPlus EPDM Cogged Raw Edge Classical
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-AX71-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-AX71-EPDM-AS and any equivalents.
The Movendis PP-AX71-EPDM-AS is a cogged classical V-belt in the AX profile with a length of 1840 mm. It belongs to the PowerPlus EPDM Cogged Raw Edge Classical series. Before you fit it, take a few minutes to inspect the drive and the sheaves.
Worn sheaves are a common reason a new belt runs hot, slips or wears out early. With the belt off, check the groove flanks for ridges, steps or a polished wear pattern, and look for cracks, chipping or a hooked edge on the rim. Run a straightedge or a sheave gauge across the groove to confirm the belt will sit at the correct depth rather than bottoming out.
Check the rest of the drive at the same time. Confirm the sheaves are aligned, the shafts turn freely without bearing play, and any tensioner or idler moves through its full range. Clear away debris and any buildup in the grooves, and replace worn or mismatched sheaves before installing the new belt.
The PP-AX71-EPDM-AS is an AX profile cogged classical V-belt measuring 1840 mm. Send that part number by WhatsApp or email and our team will confirm the belt or suggest an equivalent. If you can, include the marking from the back of the old belt and a photo of the drive so we can check the profile and length against what you are running.
Dimensions
- Section
- AX
- Length
- 1840mm
Frequently asked questions
- What should I check on the drive before fitting the PP-AX71-EPDM-AS?
- Inspect the sheave grooves for wear, ridges and cracking, confirm the sheaves are aligned, and check that the shafts and bearings turn freely. Clean out any debris in the grooves and replace damaged sheaves before installing the belt.
- How do I confirm this is the right belt for my drive?
- Read the marking on the back of the old belt and compare it with the PP-AX71-EPDM-AS, which is an AX profile belt at 1840 mm. Send us the part number and the old marking and we will confirm the match or suggest an equivalent.
- How do I request a quote?
- Send the part number PP-AX71-EPDM-AS by WhatsApp or email. Including the old belt marking and a photo of the drive helps us confirm the correct belt.