V-belt Movendis PP-AX70-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- AX
- Series
- PowerPlus EPDM Cogged Raw Edge Classical
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-AX70-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-AX70-EPDM-AS and any equivalents.
The Movendis PP-AX70-EPDM-AS is a cogged classical V-belt in the PowerPlus EPDM Cogged Raw Edge Classical series. It has an AX profile and a length of 1815 mm. To match it to the belt being replaced, compare the profile and length on the old belt with these values.
The most reliable match is the belt itself. Read the marking on the back of the belt you are replacing and confirm the profile is AX and the length is 1815 mm. If the old belt is worn or the marking is gone, measure the outside length and the top width, then compare those measurements with the profile and length above. A belt that differs in profile or length will not sit correctly in the pulley grooves.
When you request a quote, send the part number PP-AX70-EPDM-AS along with the machine or drive it serves. If you are unsure whether this is the right belt, include the old belt's marking or your measurements. We carry the Movendis line and can help confirm the correct belt for your drive.
Inspect the pulleys and the rest of the drive before installing a new belt. Check for worn grooves, misalignment, or damaged sheaves that could shorten belt life. On drives with multiple belts, replace all belts at the same time so they share the load evenly.
Dimensions
- Section
- AX
- Length
- 1815mm
Frequently asked questions
- How do I confirm this belt matches the one I am replacing?
- Check the marking on the back of the old belt for the profile and length. The PP-AX70-EPDM-AS has an AX profile and a length of 1815 mm. If the marking is unreadable, measure the old belt and compare it with these values.
- What information should I send with my quote request?
- Send the part number PP-AX70-EPDM-AS and the machine or drive it is used on. If you are not certain, include the old belt's marking or your measurements. Our team can help confirm the right belt.
- Should I replace all belts on the drive at once?
- Yes. On drives that use multiple belts, replacing them as a set helps keep the load evenly distributed. Mixing new and worn belts can cause the new belt to carry more load than the others.