V-belt Movendis PP-AX105,5-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- AX
- Series
- PowerPlus EPDM Cogged Raw Edge Classical
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-AX105,5-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-AX105,5-EPDM-AS and any equivalents.
The Movendis PP-AX105,5-EPDM-AS is a cogged classical V-belt in the AX profile with a length of 2717 mm. Before you fit it, inspect the drive and sheaves so the new belt runs true and lasts. We carry this belt and quote by part number.
Start with the sheaves. Look for worn grooves, cracks, or a polished wear pattern that changes the groove angle. Check alignment with a straightedge or laser, and confirm the sheave diameters match the AX profile. A sheave that is worn or misaligned will damage a new cogged belt quickly, regardless of the belt's own quality.
Measure the old belt and read the marking on its back. The profile and length are the key selection fields: this belt is AX profile and 2717 mm long. If the old belt is stretched or the marking is gone, measure the outside length and compare it to the drive's requirements. The cogged raw edge design is made for drives with small sheave diameters where a classical wrapped belt would run hot.
Send the part number PP-AX105,5-EPDM-AS, or the profile and length from your old belt, by WhatsApp or email. Our team replies promptly and can confirm the right belt or suggest an equivalent. For drives with multiple belts, replace the full set at the same time and re-tension after the first run-in.
Dimensions
- Section
- AX
- Length
- 2717mm
Frequently asked questions
- What should I check on the drive before fitting this belt?
- Inspect sheave grooves for wear, cracks, or a polished surface, and check pulley alignment. Worn or misaligned sheaves will shorten the life of any new belt.
- How do I confirm the belt size?
- Read the marking on the back of the old belt. This belt is AX profile and 2717 mm long. If the marking is unreadable, measure the outside length and send it with your quote request.
- Can I replace just one belt in a multi-belt drive?
- It is best practice to replace all belts in a set at the same time. Mixed wear or length can cause uneven tension and early failure. Re-tension the set after the first run-in.