V-belt Movendis PP-AX104,5-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- AX
- Series
- PowerPlus EPDM Cogged Raw Edge Classical
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-AX104,5-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-AX104,5-EPDM-AS and any equivalents.
The Movendis PP-AX104,5-EPDM-AS is a cogged classical V-belt in the AX profile with a length of 2691 mm. It belongs to the PowerPlus EPDM Cogged Raw Edge Classical series. Before fitting this belt, inspect the drive and sheaves to confirm the replacement will run true.
Check sheave grooves for wear, rust, or embedded debris. Worn grooves can cause a new cogged belt to sit too deep, slip, or wear rapidly. Confirm that the sheaves are aligned and that the belt path is free of obstructions. If the old belt failed prematurely, the sheave condition is often the cause.
Verify that the replacement belt matches the old one. The Movendis PP-AX104,5-EPDM-AS has an AX profile and a length of 2691 mm. Read the marking on the back of the old belt and compare it to this part number. If the marking is unreadable, measure the outside length and check the profile before ordering.
When replacing a belt on a multi-belt drive, fit a complete set of belts from the same production run. Mixing new and used belts can cause uneven load sharing and vibration. The PP-AX104,5-EPDM-AS is supplied as a single belt; order the quantity needed for the drive.
Dimensions
- Section
- AX
- Length
- 2691mm
Frequently asked questions
- What should I check on the drive before installing this belt?
- Inspect sheave grooves for wear, rust, or debris, and confirm that the sheaves are aligned. Also check the belt path for obstructions and verify that the old belt matches the AX profile and 2691 mm length.
- How do I confirm the Movendis PP-AX104,5-EPDM-AS is the right belt?
- Compare the part number and the marking on the back of the old belt. The replacement must have an AX profile and a length of 2691 mm. If the old marking is unreadable, measure the outside length and check the profile.
- Can I order this belt for a multi-belt drive?
- Yes. For multi-belt drives, order a complete set so all belts share the load evenly. Provide the part number PP-AX104,5-EPDM-AS and the quantity required when requesting a quote.