V-belt Movendis PP-5VX635-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- 5VX
- Series
- PowerPlus EPDM Cogged Raw Edge Narrow
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-5VX635-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-5VX635-EPDM-AS and any equivalents.
The Movendis PP-5VX635-EPDM-AS is a cogged narrow V-belt in the 5VX profile with a length of 1613 mm. It is designed for industrial drives that require a narrow cross-section and the flexibility of a raw-edge cogged construction. This belt is commonly used on equipment such as compressors, pumps, and fans where space is limited and speeds are higher.
To confirm fit, check the drive's pulley grooves and the old belt's marking. The 5VX profile indicates a narrow V-belt cross-section, and the 1613 mm length is the datum length. If the old belt is worn or stretched, measure the drive center distance and pulley diameters to verify the required length. The cogged raw-edge design can run on smaller pulleys than a wrapped belt of the same profile, but always ensure the pulleys are compatible with the 5VX profile.
When replacing, inspect all pulleys for wear, alignment, and groove condition. A worn pulley can quickly damage a new belt. If the drive uses multiple belts, replace them as a set to maintain equal tension and load sharing. For a quote, send the part number PP-5VX635-EPDM-AS and the quantity needed. If you are unsure about the profile or length, provide the old belt's marking and the drive details, and we can help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- 5VX
- Length
- 1613mm
Frequently asked questions
- What does the 5VX profile mean?
- The 5VX profile denotes a narrow V-belt cross-section. It is used in industrial drives where a compact, high-capacity belt is needed. The length of this belt is 1613 mm.
- How can I confirm this belt fits my drive?
- Check the old belt's marking for the profile and length. The 5VX profile and 1613 mm length must match your drive's requirements. Also inspect pulley grooves for wear and ensure they are compatible with narrow V-belts.
- Can I replace just one belt in a multi-belt drive?
- It is best to replace all belts in a set at the same time. Mixing new and worn belts can cause uneven tension and poor load distribution. Provide the part number and quantity for a quote.