V-belt Movendis PP-5VX625-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- 5VX
- Series
- PowerPlus EPDM Cogged Raw Edge Narrow
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-5VX625-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-5VX625-EPDM-AS and any equivalents.
This Movendis PowerPlus EPDM Cogged Raw Edge Narrow belt is a 5VX profile cogged narrow V-belt with a length of 1588 mm. It is built for industrial drives that use narrow wedge belts, where a cogged raw edge construction is specified.
Cogged narrow V-belts are common on drives where space is tight and the pulley grooves are cut for a 5V section. Typical industrial uses include pumps, fans, compressors and other constant-speed equipment that runs a matched set of narrow belts. The cogged raw edge design is often chosen where the drive needs to run over smaller pulleys.
To confirm this belt fits, read the marking on the back of the old belt. Look for the profile, 5VX, and the length, 1588 mm, or the part number PP-5VX625-EPDM-AS. Check the pulley groove profile and the number of ribs or grooves in the drive. If the old belt is worn or stretched, measure the drive center distance and pulley diameters, or send a photo of the belt marking.
When you request a quote, include the part number PP-5VX625-EPDM-AS, the profile 5VX and the length 1588 mm. If you are replacing a set, note how many belts the drive uses so we can help you confirm the right quantity. Send the details by WhatsApp or email and the team will reply promptly.
Dimensions
- Section
- 5VX
- Length
- 1588mm
Frequently asked questions
- How do I know if the Movendis PP-5VX625-EPDM-AS is the right belt for my drive?
- Check the marking on your old belt for the 5VX profile and the 1588 mm length. Also confirm the pulley groove is a 5V section and count how many belts the drive uses. If you are unsure, send a photo of the old belt marking and the drive setup.
- What information should I send to get a quote for this belt?
- Send the part number PP-5VX625-EPDM-AS, the profile 5VX and the length 1588 mm. If you are replacing a set, include the number of belts on the drive. You can send this by WhatsApp or email.
- Can this belt be used on a drive that currently runs a different profile?
- The PP-5VX625-EPDM-AS is a 5VX profile belt with a 1588 mm length. It is intended for drives with 5V pulleys. If your drive uses a different profile, send the old belt marking and the team can help you confirm the correct replacement.