V-belt Movendis PP-5VX1675-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- 5VX
- Series
- PowerPlus EPDM Cogged Raw Edge Narrow
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-5VX1675-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-5VX1675-EPDM-AS and any equivalents.
This Movendis PowerPlus EPDM Cogged Raw Edge Narrow belt is a cogged narrow V-belt in the 5VX profile, with a length of 4255 mm. Cogged narrow V-belts are used on industrial drives where a compact, high-capacity belt is needed, such as pumps, fans, compressors and other process equipment. Confirm fit by matching the profile and the length to the drive's pulley groove and center distance.
The 5VX profile identifies the belt's cross-section, and 4255 mm is its length. To confirm fit, check the old belt's marking for the same profile and length, or measure the drive's pulley grooves against the 5VX cross-section and verify the required belt length. A belt that is too short or too long will not tension correctly.
Cogged narrow V-belts are common on industrial drives that run at higher speeds or need a smaller drive envelope than a classical V-belt. This belt is built with an EPDM compound and a raw edge construction. If the drive runs multiple belts, replace them as a set so the load stays evenly distributed.
When requesting a quote, send the part number PP-5VX1675-EPDM-AS or the profile 5VX and length 4255 mm. If you are matching an existing belt, include the marking from the back of the belt. The team can confirm the belt or suggest an equivalent.
Dimensions
- Section
- 5VX
- Length
- 4255mm
Frequently asked questions
- How do I confirm that this belt fits my drive?
- Check the old belt's marking for the 5VX profile and 4255 mm length, or measure the pulley grooves and center distance to verify the same profile and length.
- What should I send to request a quote?
- Send the part number PP-5VX1675-EPDM-AS, or the profile 5VX and length 4255 mm, along with the marking from the back of the old belt if you have it.
- Should I replace all belts on a multi-belt drive at the same time?
- Yes. On a multi-belt drive, replace the belts as a set so they share the load evenly and wear at the same rate.