V-belt Movendis PP-5VX1670-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- 5VX
- Series
- PowerPlus EPDM Cogged Raw Edge Narrow
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-5VX1670-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-5VX1670-EPDM-AS and any equivalents.
The Movendis PP-5VX1670-EPDM-AS is a cogged narrow V-belt in the 5VX profile with a length of 4242 mm. The 5VX profile and the 4242 mm length are the two dimensions to match when selecting a replacement. This belt is part of the PowerPlus EPDM Cogged Raw Edge Narrow series.
For a maintenance or purchasing professional, the profile and length are the starting point. The 5VX profile determines how the belt seats in the pulley groove, while the 4242 mm length sets the center distance the drive was built around. Both values are stated on the belt and should be confirmed against the drive before ordering.
The cogged raw edge construction is typical of narrow V-belts used in industrial drives where flexibility and heat dissipation matter. Because this is a cogged narrow V-belt, it is not interchangeable with a standard wrapped belt of the same length. If the marking on the old belt is worn or missing, send the part number PP-5VX1670-EPDM-AS or the profile and length you measured.
We carry the Movendis PowerPlus EPDM Cogged Raw Edge Narrow line and can help confirm this belt or suggest an equivalent based on the data you provide. To request a quote, send the part number PP-5VX1670-EPDM-AS by WhatsApp or email. Our team replies promptly and can assist with matching the right belt for your drive.
Dimensions
- Section
- 5VX
- Length
- 4242mm
Frequently asked questions
- What does the 5VX profile mean for this belt?
- The 5VX profile is a narrow V-belt cross-section. It determines the groove width and angle the belt is designed to run in. This belt is a cogged narrow V-belt, so it should be matched to a 5VX pulley groove.
- How do I confirm the length of the PP-5VX1670-EPDM-AS?
- The length is 4242 mm. Check the marking on the back of the old belt or measure the drive to confirm that 4242 mm is the correct length before ordering.
- What information should I send to request a quote?
- Send the part number PP-5VX1670-EPDM-AS, or the profile and length from the old belt, by WhatsApp or email. If you have the old belt, a photo of the marking can help us confirm the match.