V-belt Movendis PP-5VX1360-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- 5VX
- Series
- PowerPlus EPDM Cogged Raw Edge Narrow
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-5VX1360-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-5VX1360-EPDM-AS and any equivalents.
The Movendis PP-5VX1360-EPDM-AS is a cogged narrow V-belt in the 5VX profile with a length of 3454 mm. It belongs to the PowerPlus EPDM Cogged Raw Edge Narrow series. Cogged narrow V-belts are used on industrial drives that run at higher speeds and need a belt that grips the pulley under load.
Cogged narrow V-belts of this type appear on fans, blowers, pumps, compressors and similar equipment where a compact drive transmits power at speed. The raw edge and molded cogs let the belt flex around smaller pulleys, which suits drives with limited space between shafts. The 5VX profile is the narrow cross-section used in these higher-ratio drives, and the 3454 mm length is the datum you match to the drive.
To confirm fit, read the marking on the back of the old belt and compare it against the part number, profile and length above. Check the pulley grooves for wear, the sheave alignment and the belt tension before ordering. If the old belt is worn or the marking is unreadable, measure the outside length and count the ribs or measure the top width so the profile can be verified.
When a drive uses more than one belt, replace the full set at the same time so the load is shared evenly. Send the part number, the quantity and the equipment details to MR by WhatsApp or email, and the team will confirm the belt or suggest an equivalent.
Dimensions
- Section
- 5VX
- Length
- 3454mm
Frequently asked questions
- What does the 5VX profile mean on this belt?
- The 5VX is the narrow V-belt cross-section for this drive. It is a cogged narrow V-belt, so the belt is molded with cogs on the underside to flex around the pulleys.
- How do I confirm this belt fits my drive?
- Read the marking on the back of the old belt and match the profile and the 3454 mm length. Also check the pulley grooves and alignment. If the marking is gone, measure the old belt and send the dimensions with your request.
- Should I replace all the belts on the drive at once?
- Yes. On a multi-belt drive, replace the full set together so the belts share the load evenly and wear at the same rate.