V-belt Movendis PP-5VX1350-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- 5VX
- Series
- PowerPlus EPDM Cogged Raw Edge Narrow
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-5VX1350-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-5VX1350-EPDM-AS and any equivalents.
The Movendis PP-5VX1350-EPDM-AS is a cogged narrow V-belt in the PowerPlus EPDM Cogged Raw Edge Narrow series. It uses the 5VX profile with a length of 3429 mm. Cogged narrow V-belts of this type are common on industrial drives where space is limited and small pulleys are used, such as fans, pumps, compressors and process machinery.
To confirm fit, read the marking on the back of the belt you are replacing and compare the profile and length against this belt. The profile is 5VX and the length is 3429 mm. If the old belt is worn, cracked or stretched, the marking may be hard to read, so measure the outside length and check the pulley groove width against the 5VX profile.
When a drive runs more than one belt, replace the full set at the same time so the belts share the load evenly. Check pulley grooves for wear, alignment and debris before installing the new belt, and set tension according to the drive manufacturer's specification. A cogged narrow V-belt runs cooler and grips better on small-diameter pulleys than a wrapped belt of the same profile.
Dimensions
- Section
- 5VX
- Length
- 3429mm
Frequently asked questions
- How do I confirm the Movendis PP-5VX1350-EPDM-AS fits my drive?
- Check the marking on the back of the belt you are replacing. The profile should read 5VX and the length should read 3429 mm. If the marking is unreadable, measure the belt and check the pulley groove dimensions against the 5VX profile.
- What should I send to request a quote?
- Send the part number PP-5VX1350-EPDM-AS, the quantity you need, and the drive or equipment it goes on. If you are not sure of the part number, send the marking from the old belt and photos of the drive and pulleys.
- Where is this type of belt used?
- Cogged narrow V-belts in the 5VX profile are used on industrial drives such as fans, pumps, compressors and process machinery, especially where small pulleys are used.