V-belt Movendis PP-3VX970-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- 3VX
- Series
- PowerPlus EPDM Cogged Raw Edge Narrow
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-3VX970-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-3VX970-EPDM-AS and any equivalents.
This Movendis PowerPlus EPDM Cogged Raw Edge Narrow belt is a cogged narrow V-belt in the 3VX profile with a length of 2464 mm. The profile sets the cross-section that must match your sheave groove, and the length sets the belt's outside dimension around the drive, so both numbers need to agree with the belt you are replacing.
Start with the marking on the old belt. A 3VX profile tells you the belt is a narrow cross-section, and the 2464 mm figure is the length to check against the replacement. If the back of the belt is worn or the print has rubbed off, measure the old belt and confirm the drive's sheave groove before ordering.
Cogged narrow V-belts are commonly used on industrial drives where the pulley grooves are cut for a narrow section. Inspect the sheaves for wear, oil or debris at the same time, since a worn groove can shorten belt life regardless of the belt's condition. Where a drive runs more than one belt, replace the full set together so the load stays evenly shared.
Send the part number PP-3VX970-EPDM-AS by WhatsApp or email to request a quote. If you are unsure whether this is the correct belt for your drive, include the profile and length from the old belt, plus a photo of the marking, and the team can confirm the right belt or suggest an equivalent.
Dimensions
- Section
- 3VX
- Length
- 2464mm
Frequently asked questions
- What do the 3VX profile and 2464 mm length mean for my drive?
- The 3VX profile is the belt's cross-section, which must match the sheave groove. The 2464 mm length is the dimension around the drive. Both should match the belt you are replacing.
- How do I confirm this is the right belt before ordering?
- Read the marking on the back of the old belt, or measure it if the print is worn. Send the profile and length, along with the part number, and the team can confirm the match.
- Should I replace all belts on a multi-belt drive at once?
- Yes. On drives that use more than one belt, replacing the full set together keeps the load shared evenly and helps avoid mismatched tension.