V-belt Movendis PP-3VX450-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- 3VX
- Series
- PowerPlus EPDM Cogged Raw Edge Narrow
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-3VX450-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-3VX450-EPDM-AS and any equivalents.
The Movendis PP-3VX450-EPDM-AS is a cogged narrow V-belt in the 3VX profile with a length of 1143 mm. Cogged narrow V-belts are commonly used on compact, high-speed industrial drives where a standard wrapped belt may not grip or cool as effectively. This page helps you confirm that this belt matches your drive before you request a quote.
On a narrow-profile drive, the belt cross-section and the pitch length both have to match the sheave grooves and the center distance. Start by reading the marking on the back of the old belt: confirm the profile is 3VX and the length is 1143 mm. Then check the sheave grooves for wear, and verify that the belt sits correctly in the groove rather than riding on the bottom.
Cogged narrow V-belts like this one are often found on fans, pumps, compressors, and other auxiliary drives that run at higher speeds in a tight space. The cogged construction is designed to help the belt flex around smaller pulleys and to run cooler than a solid wrapped belt of the same profile.
If you are replacing belts on a multi-belt drive, inspect all belts in the set and replace them together so the load is shared evenly. Send the part number PP-3VX450-EPDM-AS, the profile, and the length to our team by WhatsApp or email, and we will confirm the belt or suggest an equivalent.
Dimensions
- Section
- 3VX
- Length
- 1143mm
Frequently asked questions
- How do I confirm that the PP-3VX450-EPDM-AS fits my drive?
- Read the marking on the back of the old belt. The profile should be 3VX and the length should be 1143 mm. Also check that the belt sits properly in the sheave grooves and that the grooves are not worn.
- Can I replace just one belt on a multi-belt drive?
- It is good practice to replace all belts in a set at the same time. Mixing a new belt with worn belts can cause uneven loading and vibration.
- What information should I send for a quote?
- Send the part number PP-3VX450-EPDM-AS, the profile 3VX, and the length 1143 mm. If you are unsure, include a photo of the marking on the old belt and the sheave details.