V-belt Movendis PP-3VX445-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- 3VX
- Series
- PowerPlus EPDM Cogged Raw Edge Narrow
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-3VX445-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-3VX445-EPDM-AS and any equivalents.
The Movendis PP-3VX445-EPDM-AS is a cogged narrow V-belt in the 3VX profile with a length of 1130 mm, part of the PowerPlus EPDM Cogged Raw Edge Narrow series. It is the correct replacement when the belt on your drive carries this exact part number. Confirm the profile and length before you order.
To match the belt being replaced, read the marking on the back of the old belt and compare it with the part number above. The two points that must agree are the 3VX profile and the 1130 mm length. If the old marking is worn or unreadable, measure the belt and check the drive sheave groove width so the profile is confirmed.
A cogged narrow V-belt seats in the same sheave grooves as a standard narrow belt of the same profile. The raw edge and cog design is suited to drives where the belt bends over small pulleys. Inspect the sheaves for wear and alignment before fitting the new belt, since worn grooves will shorten the life of any replacement.
When more than one belt runs on the same drive, replace the full set at the same time so the load is shared evenly. Send the part number, the quantity and the drive details to our team by WhatsApp or email, and we will confirm the belt or suggest an equivalent.
Dimensions
- Section
- 3VX
- Length
- 1130mm
Frequently asked questions
- How do I confirm this is the right belt for my drive?
- Check the marking on the back of the belt being replaced. The profile must be 3VX and the length must be 1130 mm to match the Movendis PP-3VX445-EPDM-AS.
- Can I replace a standard narrow V-belt with this cogged belt?
- Yes, if the profile and length match. A 3VX cogged belt fits the same sheave grooves as a standard 3V narrow belt of the same length, and the cogged construction is used where the belt bends over small pulleys.
- What should I send to request a quote?
- Send the part number PP-3VX445-EPDM-AS, the quantity you need and any drive details you have. Our team will reply by WhatsApp or email and can help confirm the belt or suggest an equivalent.