V-belt Movendis PP-3VX1010-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- 3VX
- Series
- PowerPlus EPDM Cogged Raw Edge Narrow
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-3VX1010-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-3VX1010-EPDM-AS and any equivalents.
The Movendis PP-3VX1010-EPDM-AS is a cogged narrow V-belt in the 3VX profile with a length of 2565 mm, part of the PowerPlus EPDM Cogged Raw Edge Narrow series. When you are replacing a belt on an existing drive, the fastest way to confirm the right part is to read the marking on the back of the old belt and compare it against this profile and length.
Start with the belt itself rather than the equipment paperwork. The back of a worn belt usually still carries its profile and length marking, and that is the most reliable reference point. If the marking reads 3VX and 2565 mm, this Movendis belt matches those two figures. Where the old marking is faded or rubbed away, measure the belt and check the drive sheave groove to confirm the profile before ordering.
Cogged narrow V-belts are commonly used where a standard wrapped belt would run hotter or where the drive needs a tighter bend. This belt is a raw edge cogged construction in the 3VX profile. If you are replacing more than one belt on a multi-groove drive, order the full set at the same time so the belts run together as a matched group.
Send us the part number, the profile and the length from your old belt, and a photo of the back marking if it is still legible. We carry Movendis belts and can confirm the PP-3VX1010-EPDM-AS against your drive details or suggest an equivalent where the exact belt is not the right fit. Quotes are handled by WhatsApp or email, usually with a prompt reply.
Dimensions
- Section
- 3VX
- Length
- 2565mm
Frequently asked questions
- How do I confirm this is the belt I need to replace?
- Read the marking on the back of the belt you are removing. If it shows a 3VX profile and a 2565 mm length, this Movendis belt matches. If the marking is unreadable, measure the old belt and check the sheave groove profile before ordering.
- Should I replace all the belts on the drive at once?
- On a multi-groove drive, replacing the full set together is standard practice so the belts share the load evenly. Ordering a single belt into a worn set can leave the new belt carrying more than its share.
- What information should I send for a quote?
- Send the part number PP-3VX1010-EPDM-AS, or the profile and length from your old belt, along with a photo of the back marking if it is legible. We will confirm the belt or suggest an equivalent.