Timing belt Movendis PP-1312-S8M-540
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- PowerPlus Curvilinear Timing Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-1312-S8M-540 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-1312-S8M-540 and any equivalents.
The Movendis PP-1312-S8M-540 is a PowerPlus Curvilinear timing belt with an STD profile and a 1312 mm length. This page gives maintenance, engineering and purchasing teams the two facts that matter most when specifying a synchronous belt: the tooth profile and the length.
The STD profile identifies the tooth form used on this belt, and the 1312 mm length sets the pitch length around the drive. When you match a replacement, both values need to agree with the belt you are removing. A belt with the same profile but a different length will not sit correctly on the pulleys, and a belt with the same length but a different profile will not mesh with the tooth geometry.
The cleanest way to confirm a match is to read the marking on the back of the old belt. Compare the profile and the length shown there against the PP-1312-S8M-540. If the marking is worn or unreadable, measure the old belt and note the tooth form and the length before requesting a quote.
We carry the Movendis PowerPlus Curvilinear line and quote by part number. Send the part number, the quantity you need and any details from the old belt marking by WhatsApp or email, and the team will confirm the belt or suggest an equivalent.
Dimensions
- Profile
- STD
- Length
- 1312mm
Frequently asked questions
- What do the profile and length tell me about the PP-1312-S8M-540?
- The STD profile describes the tooth form, and 1312 mm is the belt length. Both values should match the belt you are replacing.
- How do I confirm this is the right belt for my drive?
- Check the marking on the back of the old belt. The profile and length printed there should read STD and 1312 mm. If the marking is gone, measure the old belt and note the tooth form.
- What should I send to request a quote?
- Send the part number PP-1312-S8M-540, the quantity you need and any marking details from the old belt by WhatsApp or email. The team will confirm the belt or suggest an equivalent.