Timing belt Movendis PP-1312-D/8M-180
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- PowerPlus Double-Sided Timing Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-1312-D/8M-180 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-1312-D/8M-180 and any equivalents.
This Movendis PowerPlus double-sided timing belt carries the part number PP-1312-D/8M-180 and a length of 1312 mm. It is built for drives that need synchronous power transmission from both sides of the belt, where a standard single-sided timing belt will not work. Use the part number and length to confirm the fit on your application.
Double-sided timing belts are common on drives with reversing direction or multiple driven pulleys that must turn in opposite directions from one belt. The teeth on both faces engage pulleys on either side, so the belt can drive two shafts from a single run. Confirm the belt width, tooth profile and pitch match the pulleys before ordering, and check that the drive layout requires a double-sided belt rather than a single-sided one.
The PP-1312-D/8M-180 is a Movendis PowerPlus belt with a 1312 mm length. To confirm it is the correct replacement, read the marking on the back of the old belt and compare the part number directly. Also measure the old belt length and check the pulley grooves for wear or damage. If the drive uses more than one belt, replace all belts in the set at the same time to keep load sharing even.
Dimensions
- Length
- 1312mm
Frequently asked questions
- How do I confirm this Movendis belt fits my drive?
- Compare the part number PP-1312-D/8M-180 and the 1312 mm length against the marking on your old belt. Check the pulley tooth profile and width, and make sure the drive requires a double-sided timing belt.
- What should I send to request a quote?
- Send the part number PP-1312-D/8M-180, the quantity you need, and the application details. If you are unsure of the exact belt, include the old belt marking and a photo of the drive.
- Can I replace just one belt on a multi-belt drive?
- On drives that use more than one belt, replace all belts in the set at the same time. Mixing a new belt with worn belts can cause uneven load sharing and shorten belt life.