V-belt Movendis P-SPZ3550
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
- Series
- Narrow Wedge V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-SPZ3550 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-SPZ3550 and any equivalents.
The Movendis P-SPZ3550 is a narrow wedge V-belt in the SPZ profile, 3550 mm long. It is used in industrial drives where a compact cross-section and long center distance are required, such as fans, pumps and process equipment. Confirm fit by checking the existing belt marking and measuring the drive.
Narrow wedge V-belts like the SPZ profile transmit power through a smaller cross-section than classic V-belts, which suits drives with limited pulley space. The P-SPZ3550 has a top width of 9.7 mm, a height of 8 mm and a 40-degree angle. Its 3550 mm length makes it appropriate for long-center-distance layouts.
To confirm this belt fits, read the marking on the back of the old belt and match the profile and length. If the marking is worn, measure the top width and the outside length of the belt, and check the pulley groove profile and condition. A worn or mismatched belt can cause slippage, heat and premature failure.
When replacing narrow wedge V-belts, inspect the pulleys for wear, alignment and correct groove angle. If a drive uses multiple belts, replace them as a set to keep tension even. For a quote, send the part number P-SPZ3550, the quantity and any details from the old belt marking.
Dimensions
- Section
- SPZ
- Length
- 3550mm
Frequently asked questions
- How do I confirm the P-SPZ3550 is the right belt for my drive?
- Check the marking on the back of the existing belt for the SPZ profile and 3550 mm length. If it is unreadable, measure the top width and outside length and compare with 9.7 mm and 3550 mm.
- What should I send to request a quote?
- Send the part number P-SPZ3550 and the quantity you need. If you are unsure, include the old belt marking or dimensions and a photo of the drive.
- Can I replace just one belt in a multi-belt drive?
- It is good practice to replace all belts in a set at the same time so they share the load evenly. Mixing new and used belts can lead to uneven tension and faster wear.