V-belt Movendis P-SPZ3170
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
- Series
- Narrow Wedge V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-SPZ3170 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-SPZ3170 and any equivalents.
The Movendis P-SPZ3170 is a narrow wedge V-belt with an SPZ profile and a length of 3170 mm. Its top width is 9.7 mm, its height is 8 mm, and its included angle is 40 degrees. These dimensions let you confirm the belt against your drive before you order.
The SPZ profile identifies a narrow wedge cross-section. With a 3170 mm length, this belt suits drives where that specific length is required. The 9.7 mm top width and 8 mm height define how the belt sits in the pulley groove, and the 40-degree angle matches the groove angle of the sheaves it is designed to run in.
To select this belt, compare the marking on your existing belt with the profile and length shown here. If the old belt is worn or the marking is unreadable, measure the outside length and check the cross-section against the SPZ dimensions above. The part number P-SPZ3170 combines the profile and length so you can match it directly.
When you request a quote, send the part number P-SPZ3170 and the quantity you need. If you are replacing a belt on a drive with multiple belts, include the number of belts in the set so we can help you confirm the right item. We carry Movendis narrow wedge V-belts and can assist with confirming the correct belt for your application.
Dimensions
- Section
- SPZ
- Length
- 3170mm
Frequently asked questions
- What do the SPZ profile and 3170 mm length mean for my drive?
- SPZ is a narrow wedge profile with a 9.7 mm top width, 8 mm height, and 40-degree angle. The 3170 mm length is the belt's nominal length. Match both the profile and length to your drive's requirements.
- How can I confirm this is the right belt for my equipment?
- Check the marking on your existing belt for the profile and length. If it reads SPZ and 3170 mm, this belt matches. You can also measure the old belt and compare the cross-section to the dimensions above.
- What information should I send with my quote request?
- Send the part number P-SPZ3170 and the quantity you need. If your drive uses multiple belts, let us know how many are in the set so we can help you confirm the correct belt.