V-belt Movendis P-SPZ1550
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
- Series
- Narrow Wedge V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-SPZ1550 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-SPZ1550 and any equivalents.
The Movendis P-SPZ1550 is a narrow wedge V-belt in the SPZ profile, 1550 mm long. Before you fit it, inspect the drive and sheaves so the new belt runs true from the start.
Check sheave grooves for wear, burrs, and embedded debris. Worn grooves let a new belt sit too deep and slip, while nicked flanges can cut the belt edge. Confirm sheaves are aligned and free of oil or grease. With a 9.7 mm top width, 8 mm height, and 40 degree angle, the P-SPZ1550 must seat correctly in the groove.
Look at the old belt for clues: uneven side wear points to misalignment, while a glazed or cracked back suggests heat or slipping. Replace belts in matched sets on multi-belt drives so load stays even. After fitting, run the drive and recheck tension, then inspect again after the first hours of operation.
Dimensions
- Section
- SPZ
- Length
- 1550mm
Frequently asked questions
- What are the dimensions of the Movendis P-SPZ1550?
- It is an SPZ profile narrow wedge V-belt with a 1550 mm length, 9.7 mm top width, 8 mm height, and 40 degree angle.
- How do I request a quote for this belt?
- Send the part number P-SPZ1550 by WhatsApp or email. Our team replies promptly and can help confirm the right belt or suggest an equivalent.
- What should I check on the drive before installing it?
- Inspect sheave grooves for wear, burrs, and debris, verify alignment, and remove any oil or grease so the new belt seats properly.