V-belt Movendis P-SPZ1520
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
- Series
- Narrow Wedge V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-SPZ1520 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-SPZ1520 and any equivalents.
The Movendis P-SPZ1520 is a narrow wedge V-belt in the SPZ profile, with a 1520 mm length, a 9.7 mm top width, an 8 mm height and a 40 degree angle. If you are replacing a worn belt, matching these figures to the belt you are removing is the first step. We carry this belt and quote by part number.
Start with the marking on the back of the old belt. Confirm the profile reads SPZ and the length reads 1520 mm, then check the top width, height and angle against the figures above. A belt that has stretched or worn may no longer measure true, so compare the printed part number rather than the used belt alone.
If the marking is unreadable, measure the belt cross-section and the outside length, then send those figures with your equipment details. Our team can confirm whether the P-SPZ1520 is the correct replacement or suggest an equivalent.
For drives running more than one belt, replace the full set at the same time so the belts share load evenly. Inspect the sheaves for wear, alignment and debris before installing the new belt, and check tension after the first run-in period.
Dimensions
- Section
- SPZ
- Length
- 1520mm
Frequently asked questions
- How do I confirm the P-SPZ1520 matches the belt I am replacing?
- Check the marking on the back of the old belt for the SPZ profile and the 1520 mm length. If it is legible, compare the top width of 9.7 mm, height of 8 mm and 40 degree angle. If the marking is worn, measure the cross-section and length and send those figures to our team.
- What information should I send to request a quote?
- Send the part number P-SPZ1520, the quantity you need and any details about the drive or equipment. If you are unsure of the profile or length, include the marking from the old belt or your measurements, and our team will confirm the correct belt.
- Should I replace all belts on a multi-belt drive at once?
- Yes. On drives using more than one belt, replacing the full set together helps keep tension and load shared evenly across the belts. Mixing new and worn belts can cause the new belt to carry more than its share.