V-belt Movendis P-SPZ1137
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
- Series
- Narrow Wedge V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-SPZ1137 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-SPZ1137 and any equivalents.
The Movendis P-SPZ1137 is a narrow wedge V-belt in the SPZ profile, with a length of 1137 mm. When you need to match a belt that is already on the drive, start with the marking on the old belt and compare it to these dimensions.
The SPZ profile is a narrow wedge section, and this belt has a top width of 9.7 mm, a height of 8 mm and a 40-degree angle. The length is 1137 mm. To confirm it matches the belt you are replacing, check that the old belt carries the same profile and length, and that the cross-section agrees with these figures. If the old belt is worn or the marking is unreadable, measure the top width, height and outside length and compare them to the values above.
A mismatched profile or length will not sit correctly in the pulley groove and can affect how the drive runs. Before ordering, inspect the pulleys for wear, check alignment and look for any damaged or seized components. If a drive uses multiple belts, replace them as a set so the load is shared evenly.
Dimensions
- Section
- SPZ
- Length
- 1137mm
Frequently asked questions
- How do I match the Movendis P-SPZ1137 to the belt I am replacing?
- Compare the profile and length marked on the old belt with the SPZ profile and 1137 mm length of this belt. Also check the top width of 9.7 mm, height of 8 mm and 40-degree angle against the old belt or the pulley groove.
- What should I send to get a quote for this belt?
- Send the part number P-SPZ1137, the quantity you need and any details from the old belt, such as its marking or dimensions. You can send this by WhatsApp or email.
- Can you help confirm the right belt if I am not sure?
- Yes. Send the marking on the old belt, the profile and length if known, and a photo if possible. We will check it against the P-SPZ1137 and help you confirm the correct belt.