V-belt Movendis P-SPZ1112
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
- Series
- Narrow Wedge V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-SPZ1112 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-SPZ1112 and any equivalents.
The Movendis P-SPZ1112 is a narrow wedge V-belt in the SPZ profile with a length of 1112 mm. Its 9.7 mm top width, 8 mm height and 40° angle identify it as a standard SPZ cross-section for compact, high-speed drives.
When you read the marking on the back of an SPZ belt, the profile and length are the two values that determine fit. SPZ sets the cross-section: 9.7 mm across the top, 8 mm high, with a 40° angle. The 1112 mm length is the datum length for this belt. Both must match the drive before installation.
Use the P-SPZ1112 to match an existing SPZ belt of the same length on a drive that takes this profile. Check the sheave grooves for wear and confirm the belt sits correctly in the groove. If the drive runs multiple belts, replace them as a set so the load stays evenly distributed.
For a quote, send the part number P-SPZ1112 and the quantity you need. If you are confirming a replacement, include the profile and length from the old belt, or a photo of the back marking. Our team can help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- SPZ
- Length
- 1112mm
Frequently asked questions
- What do the profile and length on the P-SPZ1112 tell me?
- The SPZ profile defines the cross-section: 9.7 mm top width, 8 mm height and a 40° angle. The 1112 mm length is the datum length. Both must match the drive for the belt to seat and run correctly.
- How do I confirm this belt replaces the one on my drive?
- Read the marking on the back of the old belt. If it shows SPZ and 1112 mm, the P-SPZ1112 matches those dimensions. You can also measure the top width and height to confirm the profile.
- What should I send to request a quote?
- Send the part number P-SPZ1112 and the quantity you need. If you are replacing a belt, include the profile and length from the old belt or a photo of the back marking so we can confirm the match.