V-belt Movendis P-SPB3550
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPB
- Series
- Narrow Wedge V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-SPB3550 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-SPB3550 and any equivalents.
The Movendis P-SPB3550 is a narrow wedge V-belt in the SPB profile, 3550 mm long. Before you fit it, inspect the drive and sheaves so the new belt runs true and lasts.
Check sheave grooves for wear, rust, or embedded debris. Worn grooves let the belt sit too deep, which reduces grip and causes slip. Confirm both sheaves are aligned and the shafts turn freely. The P-SPB3550 has a 16.3 mm top width, 13 mm height, and 40-degree angle, so the groove must match that profile.
Set the correct tension for the drive. A belt that is too loose slips and overheats; too tight loads the bearings. After fitting, run the drive briefly and recheck tension. The SPB profile and 3550 mm length are marked on the belt; keep the old belt for comparison.
To request a quote, send the part number P-SPB3550 by WhatsApp or email. If you are unsure of the profile or length, send a photo of the marking on the back of the old belt and the sheave dimensions. We carry Movendis narrow wedge V-belts and can help confirm the right belt for your drive.
Dimensions
- Section
- SPB
- Length
- 3550mm
Frequently asked questions
- What should I check on the drive before fitting the P-SPB3550?
- Inspect sheave grooves for wear, rust, and debris, and confirm alignment. Verify the groove profile matches the SPB belt: 16.3 mm top width, 13 mm height, 40-degree angle.
- How do I confirm the belt size?
- Look for the marking on the back of the old belt. The P-SPB3550 is an SPB profile, 3550 mm long.
- How do I request a quote?
- Send the part number P-SPB3550 by WhatsApp or email. If needed, include a photo of the old belt marking and sheave dimensions.