V-belt Movendis P-SPB3425
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPB
- Series
- Narrow Wedge V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-SPB3425 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-SPB3425 and any equivalents.
The Movendis P-SPB3425 is a narrow wedge V-belt in the SPB profile, with a 3425 mm length. It is built to the 40° angle and measures 16.3 mm across the top and 13 mm in height. When you need to match a belt being replaced, these are the numbers to check first.
Start by reading the marking on the old belt. If it shows SPB and 3425, this Movendis belt matches the profile and length directly. If the marking is worn or missing, measure the top width and height: 16.3 mm and 13 mm confirm the SPB cross-section. Then measure the outside length or compare against the drive's original specification to confirm 3425 mm.
A narrow wedge belt like this one runs in a defined pulley groove, so the 40° angle and the 16.3 mm top width must sit correctly in the sheave. Check the pulleys for wear, alignment and debris before installing a replacement. If the drive uses multiple belts, replace the full set at the same time so the load stays evenly distributed.
If you are unsure whether the P-SPB3425 is the correct replacement, send the belt's back marking, the drive make and model, and the pulley dimensions. Our team can confirm the right belt or suggest an equivalent based on the profile and length you provide.
Dimensions
- Section
- SPB
- Length
- 3425mm
Frequently asked questions
- How do I confirm the P-SPB3425 matches my old belt?
- Check the back of the old belt for SPB and 3425. If the marking is not readable, measure the top width and height: 16.3 mm and 13 mm indicate an SPB profile. Then confirm the length is 3425 mm.
- Can I replace just one belt in a multi-belt drive?
- It is best practice to replace all belts in the set at the same time. Mixing a new belt with worn belts can cause uneven tension and load distribution.
- What information should I send for a quote?
- Send the part number P-SPB3425, the old belt's back marking if readable, and the drive or pulley details. Photos of the belt and the drive help us confirm the correct replacement.