V-belt Movendis P-SPB2530
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPB
- Series
- Narrow Wedge V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-SPB2530 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-SPB2530 and any equivalents.
The Movendis P-SPB2530 is a narrow wedge V-belt in the SPB profile. Its 2530 mm length and 16.3 mm top width identify it as a specific replacement for drives designed around this profile and length. Use the marking on the existing belt to confirm the SPB profile and 2530 mm length before ordering.
The SPB profile is a narrow wedge section, and the 2530 mm length is the datum that determines fit on the drive. The belt measures 16.3 mm across the top, 13 mm in height, and has a 40° angle. These dimensions are the ones a maintenance or purchasing professional should match against the old belt or the drive documentation.
When the belt on the machine is worn or unreadable, check the drive for the profile and length called out in the manual or on the sheave. If the marking on the back of the old belt reads SPB and 2530 mm, the P-SPB2530 is the correct replacement. For a quote, send the part number P-SPB2530, the belt marking, or the profile and length from the drive.
Inspect the sheaves for wear and alignment before installing a new belt. A worn groove can shorten belt life even when the replacement is correct. If the drive uses multiple belts, replace them as a set so the load is shared evenly.
Dimensions
- Section
- SPB
- Length
- 2530mm
Frequently asked questions
- What do the profile and length tell me about this belt?
- The SPB profile defines the cross-section: 16.3 mm top width, 13 mm height, and a 40° angle. The 2530 mm length is the outside length used to match the belt to the drive. Both values must match the original belt or the drive specification.
- How do I confirm this is the right belt for my drive?
- Read the marking on the back of the old belt. If it shows SPB and 2530 mm, this belt matches. If the marking is gone, check the drive manual or measure the old belt and compare it to the profile and length listed here.
- What information should I send to request a quote?
- Send the part number P-SPB2530, or the belt marking, or the profile and length from the drive. Photos of the old belt and the drive nameplate can also help confirm the correct replacement.