V-belt Movendis P-SPB1650
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPB
- Series
- Narrow Wedge V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-SPB1650 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-SPB1650 and any equivalents.
The Movendis P-SPB1650 is a narrow wedge V-belt in the SPB profile, with a 1650 mm length, 16.3 mm top width, 13 mm height and a 40° angle. Before fitting a new belt, inspect the drive and sheaves to confirm they are clean and in good condition.
A new belt will not correct worn sheaves. Check the grooves for wear, scoring or embedded debris, and confirm the sheaves are aligned. A straightedge across the sheave faces will show misalignment. If the old belt shows uneven sidewall wear, the sheaves are a likely cause.
This SPB profile belt has a 16.3 mm top width and 13 mm height. When replacing, confirm the sheave groove matches the SPB profile and that the 1650 mm length fits the drive layout. Do not force the belt over the sheave; release the tensioner or move the motor.
After fitting, recheck tension and alignment. Run the drive briefly and inspect the belt for proper seating. Send the part number P-SPB1650 for a quote, and we can help confirm it is the correct belt for your drive.
Dimensions
- Section
- SPB
- Length
- 1650mm
Frequently asked questions
- What should I check on the sheaves before installing this belt?
- Inspect the grooves for wear, cracks or embedded material. Verify the sheaves are aligned and that the groove profile matches the SPB belt. Worn sheaves will damage a new belt.
- How do I confirm the P-SPB1650 fits my drive?
- Check the old belt marking for the SPB profile and 1650 mm length. If the old belt is unreadable, measure the sheave groove and the drive center distance. Send the part number and any photos for a quote.
- Can I replace just one belt in a multi-belt drive?
- If the drive uses multiple belts, replace them as a set. Mixing a new belt with used belts can cause uneven tension and premature wear.