V-belt Movendis P-SPB1600
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPB
- Series
- Narrow Wedge V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-SPB1600 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-SPB1600 and any equivalents.
The Movendis P-SPB1600 is a narrow wedge V-belt in the SPB profile with a 1600 mm length. Before you fit it, take a few minutes to inspect the drive and sheaves. Worn grooves or misalignment will shorten the life of any new belt, including this one.
Check the sheave grooves for wear, rust or embedded debris. A straightedge across the sheave faces will show whether the pulleys are aligned. Confirm that the sheaves are correct for an SPB profile belt with a 16.3 mm top width, 13 mm height and 40-degree angle. If a groove is worn oversize, the belt will sit too low and slip.
Inspect the drive for other signs of trouble: oil or grease on the sheaves, loose mounting bolts, and bearings that feel rough or have excessive play. Correct any of these before installing the new belt. When you replace a belt, check the other belts on the same drive. On a multi-belt drive, fitting one new belt alongside worn belts can overload the new one, so replacing the set is common practice.
If you are unsure whether the P-SPB1600 is the right fit, read the marking on the back of the old belt and send us the part number and the belt's profile and length. Our team can confirm the SPB profile and 1600 mm length, or suggest an equivalent. Send your request by WhatsApp or email and we will reply promptly.
Dimensions
- Section
- SPB
- Length
- 1600mm
Frequently asked questions
- What should I check on the drive before installing the P-SPB1600?
- Inspect the sheave grooves for wear, rust or debris, and check alignment with a straightedge. Also look for oil or grease on the sheaves, loose mounting bolts, and rough or loose bearings. Correct any issues before fitting the new belt.
- How do I confirm the belt on my drive is the P-SPB1600?
- Read the marking on the back of the old belt. The P-SPB1600 is an SPB profile narrow wedge V-belt with a 1600 mm length, 16.3 mm top width, 13 mm height and 40-degree angle. Send us the marking or the part number and we can confirm the match.
- Can I replace just one belt on a multi-belt drive?
- On a multi-belt drive, fitting one new belt alongside worn belts can overload the new belt. It is common practice to replace the full set so all belts share the load evenly. Check the condition of the other belts on the same drive before ordering.