V-belt Movendis P-SPA950
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPA
- Series
- Narrow Wedge V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-SPA950 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-SPA950 and any equivalents.
The Movendis P-SPA950 is a narrow wedge V-belt in the SPA profile, 950 mm long, with a 12.7 mm top width, 10 mm height and 40 degree angle. It is built for industrial drives where a compact, high-capacity belt is required. Before you fit it, inspect the sheaves and the rest of the drive.
A new belt will not correct a worn drive. Check the sheave grooves for wear, rust, burrs or embedded debris, and confirm that the grooves match the SPA profile. Misaligned sheaves or damaged grooves can shorten belt life and cause noise or vibration. If the old belt failed early, look for the cause before installing the replacement.
The P-SPA950 carries the SPA profile and a 950 mm length. When you replace it, compare the marking on the back of the old belt with the part number you need. If the marking is worn or missing, measure the old belt and note the profile and length so the correct belt can be quoted.
For a quote, send the part number P-SPA950, the quantity, and any details from the drive nameplate or the old belt. If you are unsure of the exact belt, our team can help confirm the right one or suggest an equivalent.
Dimensions
- Section
- SPA
- Length
- 950mm
Frequently asked questions
- What should I check on the drive before fitting the P-SPA950?
- Inspect the sheave grooves for wear, corrosion, burrs or debris, and verify alignment. Confirm the grooves are correct for the SPA profile. Correct any drive problem before installing the new belt.
- How do I confirm the P-SPA950 is the right belt?
- Read the marking on the back of the old belt and compare it with P-SPA950. If the marking is not legible, measure the old belt and note the profile and length. Send those details with your quote request.
- What information do you need to quote the P-SPA950?
- Send the part number P-SPA950 and the quantity you need. If you have drive details or photos of the old belt, include them so we can help confirm the selection.