V-belt Movendis P-SPA925
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPA
- Series
- Narrow Wedge V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-SPA925 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-SPA925 and any equivalents.
The Movendis P-SPA925 is a narrow wedge V-belt with an SPA profile and a 925 mm length. When you need a replacement, the marking on the back of the old belt is the fastest way to confirm you are specifying the same profile and length.
Start by reading the old belt. Look for the profile and the length: SPA and 925 mm. The P-SPA925 matches those two values, with a top width of 12.7 mm, a height of 10 mm and a 40-degree angle. If the marking is worn or missing, measure the top width and the outside length to cross-check against the data shown here.
This belt is part of the Movendis narrow wedge V-belt series. Narrow wedge belts are used in industrial drives where a compact cross-section is required. The SPA profile is a common metric wedge section, and the 925 mm length places it in a range used on many small to medium drives. Confirm that your pulley groove is designed for SPA section belts before installation.
To request a quote, send the part number P-SPA925 by WhatsApp or email. If you are replacing a belt and the marking is unclear, include the old belt's profile and length, plus the drive's pulley diameters and center distance. The team can confirm the right belt or suggest an equivalent.
Dimensions
- Section
- SPA
- Length
- 925mm
Frequently asked questions
- How do I confirm the P-SPA925 is the right belt for my drive?
- Read the marking on the back of the old belt. If it shows SPA and 925 mm, the P-SPA925 matches that profile and length. You can also measure the top width (12.7 mm) and the height (10 mm) to verify the cross-section.
- What should I send to get a quote for the P-SPA925?
- Send the part number P-SPA925 by WhatsApp or email. If you are unsure, include the old belt's profile and length, and the drive's pulley diameters and center distance so the team can confirm the correct belt.
- Can I use this belt on a drive that originally used a different profile?
- No. The P-SPA925 is an SPA profile belt. The pulley grooves must be designed for SPA section belts. Do not substitute a different profile without checking the drive requirements.