V-belt Movendis P-SPA1807
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPA
- Series
- Narrow Wedge V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-SPA1807 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-SPA1807 and any equivalents.
The Movendis P-SPA1807 is a narrow wedge V-belt in the SPA profile with a length of 1807 mm. For maintenance and purchasing teams, the profile and length are the two numbers that decide whether this belt fits the drive.
The SPA profile gives this belt a 12.7 mm top width, a 10 mm height and a 40° angle. These dimensions, together with the 1807 mm length, are the key figures to check against the pulley groove and the drive layout before ordering. A narrow wedge V-belt in this profile is selected by matching all four values, not by the part number alone.
The most reliable way to confirm a replacement is to read the marking on the back of the belt you are removing. If the old belt shows SPA and 1807 mm, this Movendis belt matches those figures. If the marking is worn or unreadable, measure the top width, height and outside length and compare them with the values above.
When you request a quote, send the part number P-SPA1807 and, if possible, the profile and length from the old belt. That lets our team confirm the belt or suggest an equivalent. It also helps to note how many belts the drive uses, since drives with multiple belts are usually replaced as a set.
Dimensions
- Section
- SPA
- Length
- 1807mm
Frequently asked questions
- What do the profile and length of the P-SPA1807 tell me?
- The SPA profile defines the cross-section: 12.7 mm top width, 10 mm height and a 40° angle. The 1807 mm length is the belt length. Both must match the pulley groove and the drive before this belt will run correctly.
- How do I confirm this is the right belt for my drive?
- Check the marking on the back of the belt you are replacing. If it reads SPA and 1807 mm, the P-SPA1807 matches. If the marking is gone, measure the top width, height and length and compare them with the figures listed here.
- What should I send with my quote request?
- Send the part number P-SPA1807 and, if you have it, the profile and length from the old belt. Also note the number of belts on the drive, so we can help you confirm the correct belt or an equivalent.