V-belt Movendis P-SPA1800
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPA
- Series
- Narrow Wedge V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-SPA1800 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-SPA1800 and any equivalents.
The Movendis P-SPA1800 is a narrow wedge V-belt in the SPA profile, 1800 mm long, with a 12.7 mm top width, 10 mm height and 40-degree angle. Before you fit it, inspect the drive and sheaves so the new belt runs true and wears evenly.
Check sheave grooves for wear, rust, or embedded debris. Worn grooves let the belt sit too deep, reducing grip and causing slip. Confirm the sheaves are aligned and the shafts turn freely. Look for oil or grease on the grooves, and correct any leaks before fitting the belt.
Verify the old belt marking matches the P-SPA1800: SPA profile and 1800 mm length. If the drive uses multiple belts, replace them as a set so load is shared evenly. Tension the belt according to the drive manufacturer's specification, then recheck after the first run-in period.
When you request a quote, send the part number P-SPA1800 and the quantity you need. If you are unsure the belt is correct, share the old belt marking and a photo of the drive. The team can confirm the SPA profile and 1800 mm length, or suggest an equivalent.
Dimensions
- Section
- SPA
- Length
- 1800mm
Frequently asked questions
- What should I check on the drive before installing this belt?
- Inspect sheave grooves for wear, rust, or debris, confirm alignment, and make sure shafts turn freely. Clean any oil or grease from the grooves and fix leaks before fitting the belt.
- How do I confirm the P-SPA1800 is the right belt?
- Check the old belt marking for SPA profile and 1800 mm length. If it matches, the P-SPA1800 is the correct size. For drives with multiple belts, replace all belts at the same time.
- What information do you need to quote this belt?
- Send the part number P-SPA1800 and the quantity. If you want confirmation, include the old belt marking and a photo of the drive so the team can verify the profile and length.