V-belt Movendis P-SPA1382
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPA
- Series
- Narrow Wedge V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-SPA1382 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-SPA1382 and any equivalents.
The Movendis P-SPA1382 is a narrow wedge V-belt in the SPA profile with a 1382 mm length. Its 12.7 mm top width, 10 mm height and 40° angle identify it as a standard narrow-section belt for drives that use SPA pulleys. Use the profile and length to confirm this belt matches the drive before you request a quote.
The SPA profile sets the cross-section that must sit correctly in the pulley groove. With a 12.7 mm top width, a 10 mm height and a 40° angle, this belt is intended for SPA-grooved pulleys. The 1382 mm length is the datum you match against the old belt or the drive specification. If the profile or length differs, the belt will not seat or tension as the drive requires.
When replacing an SPA belt, read the marking on the back of the old belt and compare it with the P-SPA1382. Check the pulleys for wear, alignment and correct groove profile as part of the same inspection. If the drive uses multiple belts, replace the full set so the load is shared evenly. Send the part number, the belt marking and the drive details by WhatsApp or email for a prompt quote.
Dimensions
- Section
- SPA
- Length
- 1382mm
Frequently asked questions
- What do the profile and length mean on the P-SPA1382?
- SPA is the narrow wedge profile, and 1382 mm is the belt length. The profile must match the pulley groove, and the length must match the drive layout. Both values are stated on this page so you can compare them with your application.
- How do I confirm this belt fits my drive?
- Compare the SPA profile and 1382 mm length with the marking on the belt you are replacing or with the drive documentation. Also confirm the top width of 12.7 mm, the height of 10 mm and the 40° angle match the pulley requirements.
- What should I send to request a quote?
- Send the part number P-SPA1382, the marking from the old belt and the drive details. If you are unsure about the profile or length, include those details so the team can help confirm the right belt.