V-belt Movendis P-SPA1357
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPA
- Series
- Narrow Wedge V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-SPA1357 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-SPA1357 and any equivalents.
Narrow wedge V-belts are used on industrial drives where a compact cross-section is needed to transmit load through smaller pulleys. This Movendis belt is the SPA profile, 1357 mm long, with a 12.7 mm top width, 10 mm height and 40° angle. Confirm the profile and length against your drive before ordering.
To confirm fit, read the marking on the back of the old belt and match the profile and length to this listing. SPA is a narrow wedge profile; the 1357 mm length is the datum length for this belt. Check that the pulley groove is cut for an SPA section and that the belt sits correctly in the groove without riding on the bottom.
Inspect the drive before replacement. Look for worn or misaligned pulleys, correct tension, and any oil or heat exposure that may have shortened belt life. On multi-belt drives, replace all belts in the set at the same time so the load is shared evenly.
Send the part number P-SPA1357 by WhatsApp or email to request a quote. If you are unsure of the profile or length, include the marking from the old belt and the pulley groove dimensions so we can help confirm the right belt.
Dimensions
- Section
- SPA
- Length
- 1357mm
Frequently asked questions
- How do I confirm this belt fits my drive?
- Check the old belt marking for the SPA profile and 1357 mm length, and verify the pulley groove is made for an SPA section. If the marking is worn, measure the top width and height and compare to 12.7 mm and 10 mm.
- Can I replace just one belt on a multi-belt drive?
- For even load sharing, replace all belts in the set at the same time. Mixing a new belt with used belts can cause uneven tension and shorter service life.
- What should I send to request a quote?
- Send the part number P-SPA1357, and if possible the old belt marking and pulley groove details. We reply by WhatsApp or email to confirm the belt or suggest an equivalent.