V-belt Movendis P-C57
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-C57 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-C57 and any equivalents.
The Movendis P-C57 is a classical wrapped V-belt with a C profile and a length of 1450 mm. It measures 22 mm across the top, 14 mm in height and has a 40-degree angle. Before you fit it, inspect the drive and sheaves so the new belt seats and wears correctly.
Start with the sheaves. Check the grooves for wear, rust, burrs or embedded debris, since a worn groove lets the belt sit too deep and slip. Confirm the sheave grooves match the belt's C profile, 22 mm top width and 40-degree angle. Misalignment between sheaves is a common cause of short belt life, so check alignment with a straightedge before the belt goes on.
Look over the rest of the drive as well. Spin the sheaves to feel for rough or noisy bearings, and check that the shaft and mounting are secure. Confirm the take-up or tensioning arrangement has enough travel to install and tension the belt. If the old belt failed early, correct the drive problem first; fitting a new 1450 mm belt into a worn or misaligned drive will only repeat the failure.
The P-C57 is a classical wrapped V-belt in the Movendis line we carry. To request a quote, send the part number P-C57, the quantity, and any details about the drive or the old belt marking. If you are unsure of the profile or length, our team can help confirm the right belt.
Dimensions
- Section
- C
- Length
- 1450mm
Frequently asked questions
- What are the dimensions of the Movendis P-C57?
- It is a classical V-belt with a C profile, 1450 mm length, 22 mm top width, 14 mm height and a 40-degree angle.
- What should I check before installing this belt?
- Inspect the sheave grooves for wear, rust or debris, check sheave alignment, and feel for rough bearings. Confirm the drive has enough tensioning travel for the new belt.
- How do I request a quote for the P-C57?
- Send the part number P-C57 and the quantity by WhatsApp or email. If you need help confirming the belt, include the old belt marking or details about the drive.